Floors of various types should be resilient on the one hand, but also visually appealing. Both requirements are met by floors based on polyurea.
Power
Floor coatings
Overview
Which areas do we cover?
Floors of all types are suitable for coating and sealing with the innovative product polyurea. Polyurea comes into its own in commercial and industrial applications in particular, due to its enormous load-bearing capacity.
Even complex geometries in modern architecture or industrial buildings are no challenge for polyurea. Here, too, it has been used for years due to its high flexibility.
Our offer ranges from parking garages and the food industry to large manufacturing plants and warehouses.
Further areas of application and individual solutions are available on request!
4 simple steps
Process At a glance
In 4 simple steps we restore the appearance and functionality of the floor. The rehabilitation is comparatively faster than with other systems but at the same time more sustainable due to the properties of polyurea.
Step #1
First of all, the old system must be sanded and removed. Subsequently, the substrate is treated with a special primer.
Step #2
After the substrate has been prepared, it must be primed with a special primer to create optimal conditions.
Step #3
The polyurea floor system is then applied to the prepared and primed substrate using high-pressure spray application.
Step #4
To also give the floor the right look and protect the surface, a final sealant in the form of a top coat is necessary.
1
Step #1
Pretreatment
First of all, the old system must be sanded and removed. Subsequently, the substrate is treated with a special primer.
1 of 4 2Step #2
Primer
After the substrate has been prepared, it must be primed with a special primer to create optimal conditions.
2 of 4 3Step #3
Polyurea
The polyurea floor system is then applied to the prepared and primed substrate using high-pressure spray application.
3 of 4 4Step #4
Sealing
To also give the floor the right look and protect the surface, a final sealant in the form of a top coat is necessary.
4 of 4Services
Market leader in specialty coatings for over 25 years.
Below is an overview of the 3 main services we offer in the field of floor coatings and waterproofing.
Quaility
Advantages
A short overview of the most important advantages of a polyurea spray film for coating, sealing as well as renovation of all kinds of floors.
All geometries
100% Dense
Crack & abrasion resistant
Chemically stable
High load capacity
High load capacity
Floors are exposed to the highest physical and chemical stresses on a daily basis and are highly resistant to a wide range of influences.
Fast application
Fast application
After the substrate has been pre-treated, the primer and the spray application are carried out using polyurea, which reaches final hardness after 3 seconds.
Long life
Long life
Floors should last for generations and for this you need the material and system. Polyurea impresses with its extremely long service life.
Design Quality
“The polyurea floor coating delivers what it promises. Even years later.”
Organic meat Sonnberg
You are interested?
Something unclear?
Questions & Answers
If you have any further questions, just call or email!
The advantages of a polyurea coating are primarily in terms of load-bearing capacity, flexibility, but also service life.
In principle, any floor is suitable for coating and waterproofing polyurea. These include, but are not limited to:
- Industrial floors
- Showrooms
- Warehouses
- Manufacturing Plants
- Kitchens
- Crane houses
- Food industry
- Parking garages
- Garages
- Basement
The m2 price or the total cost depends strongly on the total area as well as the substrate. Simply fill in all the information below and get a free quote.
Basically, we manage to prime, coat and fully seal around 250m2 / day. The curing time is a few seconds. Thus, the application is quick and fast.
Our minimum warranty is 10 years. however, has been witnessed in practice that polyurea can last for decades.
Since we use the product in cooperation with the company BASF there is every conceivable technical detail about Polyurea. You can find all information
here
.
Reference gallery
Current projects "Floors"
Underground garage floor coating
Parking garage floor coating
Painting & coating works
Parking garage floor coating
Parking garage floor coating
Food industrial floor
Food industrial floor
Roof & Floor Coatings
Contact
Submit project request
Initial technical consultations and information as well as quotations are free of charge. We request that all necessary information be provided to allow for accurate bidding.