Power

Roof

We offer innovative and sustainable solution for coating, waterproofing and renovation of all types of roofs.

Overview

Which areas do we cover?

Roofs are exposed to the highest loads and must withstand all weathers. Conventional roofing films fail after a few years and the consequential damage is extensive.

Polyurea roof coating & waterproofing was developed for this purpose. It is all-weather resistant, hardens quickly and protects any roof /
flat roof
sustainably for decades. Both in new construction and in renovation.

Further areas of application and individual solutions are available on request!

polyurea welleternit dach sanierung

(Corrugated) Eternit roof

flachdachbeschichtung

Tin roof

hornbach-graz-2

Foil roof

campus21 dachabdichtung photovoltaik

Photovoltaic roof

Bitumendach

Bitumen roof

industrieflächen dachbeschichtung+

Concrete roof

4 simple steps

Process At a glance

In 4 simple steps, we restore the appearance and functionality of your flat roof. The rehabilitation is comparatively faster than with other systems but at the same time more sustainable due to the properties of polyurea.

Step #1

First of all, the old system must be sanded and removed. Subsequently, the substrate is treated with a special primer.

Step #2

To prepare the roof for the polyurea coating, it must be extensively primed with a special primer.

Step #3

The polyurea flat roof system is then applied to the prepared and primed substrate using high-pressure spray application.

Step #4

To also give the flat roof the right look and protect the surface, a final sealant in the form of a top coat is necessary.

1

Step #1

Pretreatment

First of all, the old system must be sanded and removed. Subsequently, the substrate is treated with a special primer.

1 of 4
2

Step #2

Primer

To prepare the roof for the polyurea coating, it must be extensively primed with a special primer.

2 of 4
3

Step #3

Polyurea

The polyurea flat roof system is then applied to the prepared and primed substrate using high-pressure spray application.

3 of 4
4

Step #4

Sealing

To also give the flat roof the right look and protect the surface, a final sealant in the form of a top coat is necessary.

4 of 4
Services

Market leader in specialty coatings for over 25 years.

A short overview of the most important advantages of a polyurea spray roofing film for coating, waterproofing as well as renovation of (flat) roofs.

baustellenbegehung dach
Quaility

Advantages

A short overview of the most important advantages of a polyurea spray film for coating, waterproofing as well as renovation of (flat) roofs.

triangle-ruler

All geometries

drop-silhouette

100% Dense

All-weather

sun

UV Stable

All-weather

All-weather

Roofs in Central Europe are exposed to a wide range of climatic & weather conditions. Polyurea is resistant to heat, frost, hail, wind and snow.

Fast application

Fast application

After the substrate has been pre-treated, the primer and the spray application are carried out using polyurea, which reaches final hardness after 3 seconds.

Long life

Long life

Buildings & real estate should last for generations and for that you need the right roof. Polyurea impresses with its extremely long service life.

Standard roof vs. Polyurea solution

Design Quality

“The Polyurea roof coating delivers what it promises. Even years later.”

Campus21 Vienna

You are interested?

Something unclear?

Questions & Answers

If you have any further questions, just call or email!

The advantages of a polyurea coating are primarily in terms of load-bearing capacity, flexibility, but also service life.

In principle, any floor is suitable for coating and waterproofing polyurea. These include, but are not limited to:

  • Tin roof
  • Wooden roof
  • Interlocking roof
  • Concrete roof
  • Fiber cement roof
  • Corrugated iron roof
  • Corrugated roof
  • Corrugated sheet roof
  • uvm.

The m2 price or the total cost depends strongly on the total area as well as the substrate. Simply fill in all the information below and get a free quote.

Basically, we manage to prime, coat and fully seal around 250m2 / day. The curing time is a few seconds. Thus, the application is quick and fast.

Our minimum warranty is 10 years. however, has been witnessed in practice that polyurea can last for decades.

Since we use the product in cooperation with the company BASF there is every conceivable technical detail about Polyurea. You can find all information
here
.

Reference gallery

Current projects "Roofs"

Roof renovation flat roof foil

Roof renovation flat roof foil

Shy

Sheet metal seam roof waterproofing

Roof renovation flat roof

Roof waterproofing photovoltaic

Flat roof waterproofing

Roof renovation flat roof

Roof & Floor Coatings

Contact

Submit project request

Initial technical consultations and information as well as quotations are free of charge. We request that all necessary information be provided to allow for accurate bidding.

Scroll to Top