Roof coating

We offer innovative and sustainable roof coatings

for roofs of all types.

Roof coating

Roofs are exposed to the highest loads and must withstand all weathers. Conventional roof coatings fail after a few years and the subsequent damage is extensive.

Polyurea roof coating was developed for this purpose. It is all-weather resistant, hardens quickly and provides lasting protection for any roof for decades. Both in new construction and renovation.


Our offer ranges from recoating to complete renovation of roofs of various types.


Renovation and maintenance are particularly important to ensure the functionality of the roof. Polyurea is the best renovation solution due to its high flexibility and durability.

baustellenbegehung dach

New construction

We coat newly built roofs of all types. Both private and large commercial roofs with complex surfaces can be coated with polyurea.



We will be happy to advise you on a wide variety of concerns regarding your roof coating. Simply submit a request below via phone or contact form.


A brief overview of the main advantages of a polyurea spray film for roof coating.


Roofs in Central Europe are exposed to a wide range of climatic & weather conditions. Polyurea is resistant to heat, frost, hail, wind, snow as well as UV radiation.

Crack resistant

Chemical and physical stresses often cause cracks to form. Polyurea is extremely flexible and therefore crack-resistant or crack-bridging.

Long life

Buildings & real estate should last for generations and for that you need the right roof. Polyurea impresses with its extremely long service life.


All geometries


100% Dense




UV Stable

Standard roof coating vs. Polyurea solution

Process at a glance

In 3 simple steps we restore the appearance and functionality of your roof. 

The coating is comparatively faster than other systems but at the same time more sustainable due to the properties of polyurea.

Substrate Treatment

First of all, the old system must be sanded and removed. Subsequently, the substrate is treated with a special primer.

Polyurea roof system

Subsequently, the polyurea roofing system is applied to the prepared and primed substrate by high-pressure spray application.

Final sealing

To give the roof the right look and protect the surface, a final sealant in the form of a top coat is necessary.

You are interested?


If you have any further questions, just call or email.

In principle, any roof is suitable for coating and waterproofing with polyurea. These include, but are not limited to:

  • Tin roof
  • Wooden roof
  • Interlocking roof
  • Concrete roof
  • Corrugated iron
  • Eternit roof
  • Shingle roof
  • uvm.

The advantages of a polyurea coating lie primarily in its resilience, flexibility and durability. In addition, jointless surface can be sealed with all RAL shades.

Basically, we manage to prime, coat and fully seal around 250m2 / day. The curing time is a few seconds. Thus, the application is quick and fast.

Our minimum guarantee is 25 years. However, polyurea has been shown in practice to outlast decades.

Since we use the product in cooperation with the company BASF, there is every conceivable technical detail about Polyurea. You can find all information

The m2 price or the total cost depends strongly on the total area as well as the substrate. Simply fill in all the information below and get a free quote.

Reference Gallery

Polyurea is suitable for both new coating and renovation of roofs of various types.

Contact form

Initial technical consultations and information as well as quotations are free of charge.

*Please provide all necessary information to allow for accurate bidding.

Offer & techn. Information

throughout Austria


Address: Reininghausstrasse 29 – 8020 Graz

25 years of innovation in the waterproofing and coating sector with polyurea.

Scroll to Top